Polam Nakło 6652-001 złącze słupowe

400V insulating pole connectors

1. APPLICATION
Pole connectors are designed to power and protect luminaires on street poles and park lighting lines. They are adapted to make branches from them. The minimum diameter of the lighting pole is 120mm (inside).
2. CONSTRUCTION
The connector housing is made of high-impact thermoplastic. The transparent cover, snap-closed and secured with a screw, enables easy replacement or activation of the protection.
Pole connector designed to work in TN-C type systems
The connector is equipped with a set of terminals, snap-mounted in the housing, which facilitates the connection of power cables outside the pole.
Current terminals enable the connection of 3 wires with cross-sections from 10mm2 to 35mm2 and 2 wires with cross-sections from 1mm2 to 4mm2. The PEN protective-neutral terminal enables the connection of 5 Cu conductors with a cross-section of 1mm2 to 4mm2 on the outflow.
Each of the terminals is equipped with a hinged overlay enabling the insertion of wires "from the top".
The terminals use M8 set screws to ensure adequate pressure and good contact between stacked wires.

Dimensions:

a 80mm, b 340mm, c 90mm